What does cut vinyl lettering cost?

It is generally the most economical signage option, priced on the size, number of colours and complexity of the shape rather than a print run. A simple name and phone number on a window or door costs far less than a detailed multi-colour logo. We quote from your artwork and the surface it is going on, so send through your logo file for an accurate price.

What artwork do you need for cut vinyl?

A vector file of your logo or lettering is ideal, because the vinyl is cut directly from those paths. A photo or a low-resolution JPEG is not enough on its own - if that is all you have, we redraw the artwork as a vector first, which we confirm with you on a proof before anything is cut.

How long does cut vinyl lettering last?

Cast vinyl on a vehicle or anything curved typically holds up well for around 7 to 10 years outdoors, while calendered vinyl on a flat wall or window suits a shorter-term job and a lower budget. Both fade eventually under UV exposure, so we will tell you honestly which film suits your expected timeframe and budget when we quote the job.

Can vinyl lettering be removed without damaging paint or glass?

Yes, on sound, undamaged paint or glass, vinyl lifts off cleanly, especially with gentle heat. It is one of the reasons vinyl lettering suits rebranding or a change of phone number - there is no panel to unbolt and no paintwork to repair. Very old or already-damaged paint is the exception, which we would flag before quoting a removal.

CUT VINYL SIGNWRITING WANGARATTA

Not every sign needs to be printed. Putting your business name on a shopfront window, a boat, a piece of equipment or a vehicle door often calls for lettering rather than a full printed panel - crisp, permanent vinyl cut directly to shape, with no printed edge to fade or lift over time. It is the traditional signwriting trade, just done with a computer-guided blade instead of a hand-lettering brush.

START A PROJECT ENQUIRY CALL 0347 168 916

Proofed before anything is cutYou sign off the scaled proof, then we make it

MATERIALSCast and calendered vinyl

FINISHGloss, matt, translucent, metallic

INSTALLWindows, walls, vehicles, equipment

LIFESPANUp to 7-10 years for cast film

For a lot of small jobs - a company name on a glass door, a phone number on a van, a logo on a piece of equipment - a full printed and laminated panel is more sign than the job actually needs, and cut vinyl gets the same professional result for less outlay and less lead time. SignPro Wangaratta cuts vinyl lettering and logos on a plotter direct from your vector artwork, then applies it to glass, painted walls, vehicle doors, boats and machinery. Because the letters are cut rather than printed, there is no white halo around the edge and no print resolution to worry about - the edge is exactly as crisp on a two-metre letter as it is on a two-centimetre one. Application is by hand for small jobs and with transfer tape for larger sets, so lettering goes on straight, aligned and bubble-free whether it is a single door or a full window run. Colour comes from the vinyl itself rather than an ink layer, which is part of why the finish stays sharp for years instead of fading the way a cheaper printed sticker can.

Film choice matters more than most people expect. Calendered vinyl is the economical option for flat surfaces and shorter-term signage, while cast vinyl is thinner, more conformable and holds up far longer on curves - vehicle doors, boat hulls, anything with contours or a long outdoor life ahead of it. Choosing the cheaper calendered film on a curved vehicle panel is a false economy, because it is more likely to lift at the edges over time, so we match the film to the surface rather than defaulting to one option for every job. Both films remove cleanly from sound paint or glass when it is time to re-brand, update a phone number or sell the vehicle on, which makes vinyl lettering one of the most economical ways to get a genuinely professional look on glass and vehicles without committing to a full printed wrap.

WHY IT WORKS

WHY CUT VINYL SIGNWRITING FROM SIGNPRO

CRISP PERMANENT EDGES

Cut vinyl has no printed edge to soften or fade, so lettering stays crisp for the life of the film - on a shopfront window, a two-metre letter reads exactly as sharp as a two-centimetre one, because the edge comes from a blade following your vector artwork, not a print head.

CAST OR CALENDERED FILM

Calendered vinyl suits flat walls and shorter-term jobs at a lower cost. Cast vinyl costs more but is thinner and more conformable, which matters on vehicle doors, boat hulls and anything curved, and it holds its colour and adhesion for a longer outdoor life. We recommend the film based on the surface, not the price alone.

CLEAN REMOVAL AND REBRAND

Vinyl lettering removes cleanly from sound paint and glass when a phone number changes, a business rebrands or a vehicle is sold on. There is no panel to unbolt and no paint to repair underneath, which keeps rebranding a same-day job rather than a full re-signage exercise.

MOST ECONOMICAL FINISH

Because there is no printing involved, cut vinyl lettering is typically the most economical way to get a genuinely professional look on a shopfront window or a work vehicle, especially where a simple name, logo and phone number is all the job needs. It is usually the fastest option to turn around too.

LOCAL COVERAGE

SERVING NORTH EAST VICTORIA

Cut vinyl lettering goes on shopfront glass in Wangaratta, boats and trailers around the King Valley, and vehicle doors for tradies working out to Benalla, Myrtleford and Glenrowan. Because the region means long highway kilometres and hard summer sun, we default to cast film on vehicles and anything curved, and calendered film where a flat wall or a shorter-term job does not need the extra durability.

WangarattaWodongaAlburyBenallaMyrtlefordBeechworthMilawaGlenrowan

RECENT WORK